Telefonservice unter +49 30 30111870

  Kostenloser Versand innerhalb Deutschlands

  Sicher einkaufen dank SSL

Buchsengehäuse für Stiftkontakte, 12-polig, A-Codierung / ATM04-12PA

Buchsengehäuse für Stiftkontakte, 12-polig, A-Codierung / ATM04-12PA
Buchsengehäuse für Stiftkontakte, 12-polig, A-Codierung / ATM04-12PA
Buchsengehäuse für Stiftkontakte, 12-polig, A-Codierung / ATM04-12PA
Hinweis: Abbildung ggf. abweichend oder ähnlich.
     
110-007-007
ATM04-12PA
Gewicht:
0,016 kg

Verfügbarkeit

Lager 1: Stück verfügbar

  • Lieferzeit Lager 1 wenn lagernd: 1-3 Tage

Lager 2: Stück verfügbar

  • Lieferzeit Lager 2 wenn lagernd: 5-7 Tage
2,92 € *

zzgl. MwSt. zzgl. Versandkosten

Sofort versandfertig, Lieferzeit ca. 1-3 Tage

Analog Artikel-Nr. DTM04-12PA von Fa.DEUTSCH ATM Series™ 2, 3, 4, 6, 8 and 12 positions... mehr
Produktinformationen "Buchsengehäuse für Stiftkontakte, 12-polig, A-Codierung / ATM04-12PA"
Analog Artikel-Nr. DTM04-12PA von Fa.DEUTSCH

ATM Series™

2, 3, 4, 6, 8 and 12 positions available
  • 16-22AWG, 7.5A, Size 20
  • High-performance, cost-effective
  • Superior environmental seal retention
  • Compatible with existing standard products industry-wide.

Overview

ATM Series™ connectors are a high-performance, cost-effective solution specifically designed for smaller AWG applications, while still maintaining the strengths of the AT Series™ product line.

The connector design incorporates an integral latching system that ensures a definitive electrical and mechanical connection. Connector housings are manufactured with a thermoplastic material that is not only durable, but has excellent UV resistance, dielectric/mechanical properties and environmentally RoHS compliant. The sealing system is comprised of an internal and rear silicone, multi-sealing perimeter against environmental ingress. Contacts are derived from quality copper alloy to ensure an electrically-reliable connection.

ATM Series™ connectors are compatible with other existing standard products industry-wide.

Features & Benefits
Current CapacitySize 20, 7.5A (max)
Wire RangeSize 20 contacts will accept wire ranges of 16 thru 22AWG
TemperatureOperating temperature range: -55°C to +125°C at rated current
Dielectric ValueMeets or exceeds 1500 volts minimum
Drop TestShall not become detached or loosened when placed at 750mm and dropped to concrete eight times
ShockNo latch disengagement or discontinuity shall be the result when subjected to 50 g’s in each of three axis (X, Y & Z)
VibrationContinued continuity without degradation to mechanical or physical attributes following vibration. (max acceleration 20 g’s at Sine sweep of 10-2000Hz)
Connector Terminal RetentionWhen subjected to a direct pull, contacts achieve a minimum pull-out force of 89 lbs.
Connector RetentionA mated connector subjected to a pulling force by the exiting wire bundle at 89 lbs. times the number of contacts to a maximum of 356 lbs. applying load for 30 seconds
Thermal ShockSubjected to 10 cycles at -55°C to +125°C with no cracking, chipping or other damage detrimental to the normal operation of the connector
Insulation Resistance1000 megohms minimum at 25°C
Mating Cycle DurabilityFollowing 100 cycles of connection engagement and disengagement, degradation either mechanical or electrical is not evident
Contact Millivolt DropSize 20 (stamped & formed) contacts with 20AWG conductor - 60 mV (solid contact) drop max; 100 mV (stamped & formed contact) drop max at 7.5A test current
Water ImmersionA mated connection, properly wired, placed in an oven at +125°C for 1 hour, then placed immediately in a depth of water of 1 meter for 4 hours without loss of electronic performance
Product Material
HousingsThermoplastic
SealsSilicone Elastomer
Secondary LocksThermoplastic
ContactsCopper Alloy, Nickel Plated, Gold optional

NOTE:
Wedgelocks are required for all plugs.

Zuletzt angesehen