Telefonservice unter +49 30 30111870

  Kostenloser Versand innerhalb Deutschlands

  Sicher einkaufen dank SSL

Steckergehäuse für Buchsenkontakte, 4-polig / AT06-4S

Steckergehäuse für Buchsenkontakte, 4-polig / AT06-4S
Steckergehäuse für Buchsenkontakte, 4-polig / AT06-4S
Steckergehäuse für Buchsenkontakte, 4-polig / AT06-4S
Hinweis: Abbildung ggf. abweichend oder ähnlich.
     
110-006-848
AT06-4S
Gewicht:
0,007 kg

Verfügbarkeit

Lager 1: Stück verfügbar

  • Lieferzeit Lager 1 wenn lagernd: 1-3 Tage

Lager 2: Stück verfügbar

  • Lieferzeit Lager 2 wenn lagernd: 5-7 Tage
0,98 € *

zzgl. MwSt. zzgl. Versandkosten

Sofort versandfertig, Lieferzeit ca. 1-3 Tage

Analog Artikel-Nr. DT06-4S von Fa.DEUTSCH AT Series™ 2, 3, 4, 6, 8 and 12 positions... mehr
Produktinformationen "Steckergehäuse für Buchsenkontakte, 4-polig / AT06-4S"
Analog Artikel-Nr. DT06-4S von Fa.DEUTSCH

AT Series™

2, 3, 4, 6, 8 and 12 positions available
  • 14-20AWG, 13A, Size 16
  • High-performance, cost-effective
  • Superior environmental seal retention
  • Compatible with existing standard products industry-wide
  • RockSolid™ Contact technology (optional)

Overview

AT Series™ connectors are a high-performance, cost-effective solution able to be used in a variety of interconnect applications: Heavy Duty, Transportation, Marine, Diagnostic, Military, Alternative Energy and Agricultural. They contain superior environmental seals, seal retention capabilities and feature RockSolid™ Contact technology.

The connector design incorporates an integral latching system that ensures a definitive electrical and mechanical connection. Connector housings are manufactured with a thermoplastic material that is not only durable, but hasexcellent UV resistance, dielectric/mechanical properties and environmentally RoHS compliant. The sealing system is comprised of a front and rear silicone, multi-sealing perimeter against environmental ingress. Contacts are derived from quality copper alloy to ensure an electrically-reliable connection.

AT Series™ connectors are compatible with other existing standard products industry-wide.

Features & Benefits
Current Capacity Size16, 13A (max)
Wire RangeSize 16 contacts will accept wire ranges of 14 thru 20AWG
TemperatureOperating temperature range: -55°C to +125°C at rated current
Dielectric ValueMeets or exceeds 1500 volts minimum
Drop TestShall not become detached or loosened when placed at 750mm and dropped to concrete eight times
ShockNo latch disengagement or discontinuity shall be the result when subjected to 50 g’s in each of three axis (X, Y & Z)
VibrationContinued continuity without degradation to mechanical or physical attributes following vibration. (max acceleration 20 g’s at Sine sweep of 10-2000Hz)
Connector Terminal Retention When subjected to a direct pull, contacts achieve a minimum pull-out force of 25 lbs.
Connector RetentionA mated connector subjected to a pulling force by the exiting wire bundle at 25 lbs. times the number of contacts to a maximum of 100 lbs. applying load for 30 seconds
Thermal ShockSubjected to 10 cycles at -55°C to +125°C with no cracking, chipping or other damage detrimental to the normal operation of the connector
Insulation Resistance1000 megohms minimum at 25°C
Mating Cycle DurabilityFollowing 100 cycles of connection engagement and disengagement, degradation either mechanical or electrical is not evident
Contact Millivolt DropSize 16 contacts with 16AWG conductor - 100 mV drop max at 13A test current
Water ImmersionA mated connection, properly wired, placed in an oven at +125°C for 1 hour, then placed immediately in a depth of water of 1 meter for 4 hours without loss of electronic performance
Product Material
HousingsThermoplastic
SealsSilicone Elastomer
Secondary LocksThermoplastic
ContactsCopper Alloy, Nickel Plated, Gold optional

NOTE:
Wedgelocks are required for all plugs.

Zuletzt angesehen